top of page

4 In/2 Out Push Button Controller for SDS

Convenient, compact connection for small controls, system bus.

Controls-1250x625grnblurZoom-1024x512.jpg

Push Button Controller

SDS-PCI-2-450x225b (1).jpg
SDS-PCI-2-450x225a.jpg
SDS-PCI-2-450x225c.jpg

Convenient, compact connection for small controls, system bus.

Holjeron’s Push Button Controller products for Smart Distributed Systems (SDS) provide a convenient and compact method for connecting small control panels to a system bus. Each push Button Controller supports up to 4 inputs and 2 outputs (I/O).

Further, the Push Button Controllers provide more than just a simple I/O interface to a host controller. The health of a light bulb or LED can be continuously monitored, and a diagnostic event is reported if a bulb is missing or burns out. A flash rate can be entered into the Push Button Controller to energize an output as being on solid, or on and flashing. Holjeron’s innovative bracketing for the Push Button Controllers allows them to be used with any 22,5 or 30,5 mm push button.

4 inputs and 2 outputs for connecting push button stations to SDS.
Bus-powered I/O eliminates the need for separate control power.
Outputs can be configured to flash at a settable rate by just turning on an output.
Failed bulb detection diagnostic.

Ordering Information

PBC-GEP222
PBC-SDS220
PBC-SDS222

Push Button Controller for SDS, 4 In/2 Out, GE CR104P
Push Button Controller for SDS, 4 In/2 Out, 22 mm
Push Button Controller for SDS, 4 In/2 Out, 30 mm

Product Datasheet
Download

Push Button Controller for SDS

1 file(s) 117 KB

bottom of page