top of page

Opto 22 Interface for SDS

Single system interfaces with up to 16 digital I/Os.

Controls-1250x625grnblurZoom-1024x512.jpg

Opto 22 Interface

SDS-PCI-2-450x225b (1).jpg
SDS-PCI-2-450x225a.jpg
SDS-PCI-2-450x225c.jpg

Single system interfaces with up to 16 digital I/Os.

The Holjeron Digital Input/Output (I/O) Interface enables the use of industry standard digital inputs and output modules in a Smart Distributed System (SDS) network. The Digital I/O Interface uses a single system address while providing up to 16 inputs and/or outputs. Inputs and outputs of varying signal types and voltages can be mixed in any order.

Up to 16 digital I/Os as a single system address.
Significantly increases I/O density on a bus with a minor increase in bus traffic (versus a single point component).
Mix inputs and outputs, plus mix voltages, on a single I/O rack.
Uses industry standard 50 pin header connector. Compatible with a variety of I/O manufacturers, including Opto 22 and Grayhill.
I/O racks and modules can be purchased from Holjeron for a complete solution.

Ordering Information

IOB-DIG200
IOB-G4PB16H
IOB-G4PB8H
IOB-G4IDC5
IOB-G4IAC5
IOB-G4IAC5A
IOB-G4ODC5
IOB-G4ODC5A
IOB-G4OAC5
IOB-G4OAC5A
IOB-G4ODC5R
IOB-G4ODC5R5

16 Point Digital I/O interface for SDS
16 Point I/O Rack
8 Point Rack
Input Module 12-32 VAC/10-30 VDC 50 mA
Input Module 90-140 VAC/VDC 50 mA
Input Module 180-280 VAC/VDC 50mA
Output Module 5-60 VDC 2 amps
Output Module 5-200 VDC 2 amps
Output Module 90-140 VAC 2 amps
Output Module 24-280 VAC 2 amps
Output Module, N.O., 100 VDC/130 VAC 0.5 mA
Output Module, N.C., 100 VDC/130 VAC 0.5 mA

Product Datasheet
Download

Opto 22 Interface for SDS

1 file(s) 132 KB

bottom of page